Tepache – Pineapple “Beer” Recipe (2024)

Tepache – Pineapple “Beer” Recipe (1)

Tepache! Pronounced teh-PAH-chay. A delicious pineapple drink that originates from Mexico and is the best way to reuse pineapple skins (peels/rinds) I’ve found. So far.

Sometimes tepache is called “pineapple beer” or “pineapple brew.” But similar to ginger beer, this isn’t actually beer. However, there is some alcohol in the final product, I’ll write more about that below. And beer, by definition, is a drink made from yeast-fermented malt flavored with hops. There’s no malt or hops in this drink, and the yeast we will use is naturally occurring on the pineapple skin.

There are actually a few similarities between making tepache and ginger beer. Both recipes call for using the skin of the plant, which then ferments in sugar and water, the byproduct being carbonation and a low amount of alcohol.

Except unlike ginger beer, tepache isn’t carbonated — you only seal the bottle with a cheesecloth, so the bubbles escape. And also unlike ginger beer, tepache isn’t spicy. At all.

Flavor:

Tepache is mildly sweet, slightly tangy, and pineapple-y. Like a light pineapple juice.

Time until finished:

From start to finish, tepache is ready to drink in less than 2 days. Usually about 36 hours.

One last very important note:

if you are in any way confused about which type of alcohol is safe to drink, please read the “Common sense warning” at the bottom of this page. Never add methanol, isopropyl (rubbing) alcohol, methanol, glycerol, ethylene glycol or propylene glycol to anything a human or animal is going to consume (eat or drink). These are cleaning solvents, anti-freeze, and other absolutely toxic substances that will kill you.

How is this a low-waste recipe?

Tepache – Pineapple “Beer” Recipe (2)

In addition to finding a delicious use for pineapple skin, you can also use the top of the pineapple to REGROW A PINEAPPLE! For full instructions on how to regrow a pineapple, click here.

Materials Needed:

  1. 1 64oz mason jar
  2. Cheese cloth

Ingredients:

  1. The skin of one pineapple
  2. 3/4 cup of brown sugar, sugar, or maple syrup
  3. 6 cups of water
  4. 3 cloves (optional)
  5. 1 cinnamon stick (optional)

Directions:

  1. Select a ripe pineapple (not too green, not too orange) it should smell like a pineapple when you sniff the fruit.
  2. Rinse off the pineapple. If you’re planning on regrowing the pineapple, try to keep the leaves dry. (For tips on how to regrow your pineapple, click here before continuing to the next step).
  3. With a sharp knife, carefully slice off the top and bottom of the fruit, about 1/2 inch thick, and compost. I find these areas harbor a lot of mold so I generally don’t use them in my tepache.
  4. Remove the skin from the pineapple. (You can cut up the fruit and serve immediately or store it in the fridge for a few days or the freezer for years. I love frozen pineapple in my smoothies!)
  5. Stuff the skin in the mason jar, add the sugar, and fill 1/2 inch from the top with water – approximately 6 cups worth.
  6. Seal the mason jar with a cheese cloth and set on a counter for 12-24 hours.

That’s pretty much the whole recipe. Depending on how warm your kitchen is, the fermentation can take anywhere from 12-24 hours. And again, because this isn’t sealed tightly, this drink isn’t going to be fizzy like the ginger beer. Of course, there’s nothing stopping you from sealing it to make a carbonated drink, just make sure you’re burping it regularly. so the glass doesn’t explode.

After 24 Hours:

Tepache – Pineapple “Beer” Recipe (3)

After 24 hours, you will notice a white foam on the surface of the drink. That’s totally normal! Just skim it off and discard. Your tepache is totally drinkable at this stage, but if you wait an extra 12-24 hours, the alcohol content should increase by about 1%.

DON’T GO LONGER THAN 48 HOURS!

Unlike ginger beer which gets stronger with age, tepache will actually turn into a not-very-palatable pineapple vinegar. Not super refreshing. But PERFECT for pickling peppers, so don’t toss it if you forget about it! You can even cook with it.

ITS READY!

When you’re ready to drink it, strain out the solids – toss them into your compost – and pop that delicious pineapple drink into the fridge to chill and serve. You can pop a little cinnamon stick in there for garnish if that makes you happy.

It doesn’t make me happy, personally. It just hits me in the face when I try to drink it. I don’t need that kind of abuse in my life…. not from a piece of bark.

STORAGE:

Store any leftover tepache in the fridge for about a day. This stuff doesn’t really stay fresh too long. So if you don’t drink it quickly, you might end up with vinegar. You can freeze this as well, but it might not taste quite as fresh when it thaws.

How To Regrow a Pineapple:

Click here for Full Instructions

How does fermentation create ethanol?

When yeast feeds on sugar during the fermentation process, the byproduct is carbon dioxide (fizziness) and ethanol (alcohol).

So basically, yeast eats sugar then farts out C02 and ethanol, and boom there’s ya booze.

NEVER EVER EVER EVER EVER EVER EVER ADD METHANOL, ISOPROPYL (RUBBING) ALCOHOL, GLYCEROL, ETHYLENE GLYCOL, OR PROPYLENE GLYCOL INTO ANYTHING YOU ARE GOING TO CONSUMER. EVER.

Caps lock= super serious.

In fact, unless the item has nutritional information listed on the package, don’t eat it. It’s probably not food. That’s a pretty good rule of thumb.

Why?

Because you will die in a painful and awful way.

Fermentation creates ETHANOL – a form of alcohol that is much less deadly.

But let’s be real: no alcohol is truly “safe” to drink. Everything is toxic – it just depends on the dose (yes, that includes water and oxygen). But comparing ethanol to methanol or rubbing alcohol or, shoot, anti-freeze…. ethanol is certainly much less toxic and in moderate amounts is generally okay, like drinking the occasional beer or glass of wine. But it’s obviously not ideal to chug a gallon of vodka, that would probably kill you, too.

METHANOL OR ISOPROPYL ALCOHOL SHOULD NEVER BE CONSUMED AND A TINY AMOUNT WILL KILL YOU. Sorry, had to say it again.

****Always consumer alcohol responsibly when you are of legal age.****

Tepache – Pineapple “Beer” Recipe (2024)

FAQs

How long should I let tepache ferment? ›

Fermentation should activate into two to three days, and the tepache is usually optimal by day five. By then, small bubbles should cover the surface of the ferment. Store tepache in the refrigerator in a covered glass jar for up to a week. You may need to burp the jar, occasionally, to release gas.

How to tell when tepache is done? ›

If the ambient temperature in your kitchen is warmer, the tepache will ferment faster than it will at a cooler room temperature. To determine when the tepache is ready, just taste it! It should have a pleasant, sweet, lightly fermented flavor but you can ferment it longer if you like a more pronounced, boozy flavor.

How do you increase alcohol content in tepache? ›

As with most fermentations, tepache does contain a very small amount of alcohol (similar to kombucha). If you want more alcohol (of course you do), add in yeast (baker's yeast will do in a pinch but preferably brewer's or champagne yeast).

Does pineapple have to be ripe for tepache? ›

A ripe pineapple will make a more flavorful drink—you'll enjoy eating it more too!

How do I know when my ferment is done? ›

How Do I Know When My Ferment is Done... Fermenting?
  1. Always follow a recipe. ...
  2. Allow your ferment to go for 7 days untouched. ...
  3. Taste your ferment on day 7 with a clean fork. ...
  4. Finished ferments should have a pH reading of 4.5 or lower.

How do you know if tepache is bad? ›

If you see mold growing, discard the tepache and start again. Make sure it is mold though. Mold is dry, fuzzy, and always sits on the surface. It is normal for a layer of white film or bubbles to appear.

Can tepache have botulism? ›

There are a couple of things to keep in mind when making tepache. The first is to make sure the work surface is thoroughly cleaned and sanitized. This step is crucial to prevent unwanted microbes from going into the fermentation jar, which could result in unwanted mould growth and the risk of contracting botulism.

What does Kombucha look like while fermenting? ›

Look for a thin, translucent film on the surface of the kombucha; this will be the new SCOBY or “pellicle.” This is a sign that the yeast and bacteria are doing their thing and fermenting the tea.

Will tepache get you drunk? ›

Though tepache is fermented for several days, the resulting drink does not contain much alcohol. In Mexican culinary practice, the alcoholic content of tepache may be increased with a small amount of beer.

What is the highest alcohol content in fermentation? ›

With unlimited sugar, the alcohol level increases during fermentation until it reaches a concentration between 12 and 18%. Levels of alcohol above 18 or 19% are usually toxic to the yeast and leads to the death of the cells. This tolerance limit laces an upper value on the % of alcohol produced solely by fermentation.

How much pineapple to add to beer? ›

So if you want to brew a fruity, pineapple wheat beer consider using pasteurized pineapple juice or pineapple puree. A good time to add fruit is after primary fermentation is complete. One pound per gallon (0.45 kg per 4 L) is a good starting point for a beer with reasonable fruitiness.

How to keep pineapple submerged in tepache? ›

Wedge the core and strips of rind into the jar so they'll stay submerged – arranging them in horizontal stripes around the sides of the jar works well. (Keep the pineapple for another use.) Add the spices, then pour over the sugar water, making sure all the fruit is fully covered in liquid, and seal the jar.

How long should I wait for fermentation to start? ›

Fun fact, legally wort becomes beer the moment yeast is added to it, so no minors past this point…. You should start to observe signs of fermentation within 48 hours of pitching your yeast. If you plan to add any yeast nutrients, you'll want to add those to the primary fermentation.

Can you ferment for too long? ›

Overfermentation is a phenomenon which is a result of fermentation that lasted too long or had too much culture in it. Read on to get more insight on it and some tips on how to avoid it. Time is Important! Usually overfermentation happens when we leave the culture to ferment longer than recommended.

Is it better to ferment kombucha longer? ›

If you want it to be more acidic, then keep fermenting it longer. If it tastes sour enough, then you're ready to bottle. I tend to like bottling when it's just a little too sweet for my liking (knowing that sugar will continue to get eaten away during F2 in the bottle).

How long does tepache take to carbonate? ›

Make sure to leave two inches free at top of the bottle and you're using bottles made for fermentation as this is the part where it can explode. Ferment for 1 to 3 days but burp and check the carbonation after 24 hours.)

References

Top Articles
Latest Posts
Article information

Author: Duane Harber

Last Updated:

Views: 5803

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Duane Harber

Birthday: 1999-10-17

Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

Phone: +186911129794335

Job: Human Hospitality Planner

Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.